Categories
- Carpet Cleaners
- Dog Fouling Solutions
- EXTRA SPECIAL OFFERS
- Electric Steam Cleaners
- Gutter Cleaning
- Pressure Washers
- Rotary Scrubber/Polishers
- Sand Blasters/Parts Cleaners
- Scrubber Driers
- Sweepers & Litter Vacuums
- Vacuum Cleaners
- Window Cleaning Equipment
- Used Machines
- Janitorial
- Chemicals
- Paper Products
Our Newsletter
- Home
- Cleaning Advice
- Spray Buffing and Spray Burnishing
Spray Buffing and Spray Burnishing
Spray Buffing and Spray Burnishing
Regular maintenance of sealed floors including; Vinyl, Lino, Thermoplastic, Rubber, Terrazzo, Quarry tile, Wood, Cork etc floors which have light/moderate soilage
Equipment:
Recommended Products:
Snap back Spraybuff or a Diluted Floor maintainer – Buff to a shine, but do not over wet the floor
Regular maintenance of sealed floors including; Vinyl, Lino, Thermoplastic, Rubber, Terrazzo, Quarry tile, Wood, Cork etc floors which have light/moderate soilage
Equipment:
- Dust Control Mop
- Rotary Floor Machine with red or less abrasive pad
- Spray cleaning product (floor polish maintainer)
- Hand trigger-type sprayer
- Sweep area to be buffed with dust control mop
- Dilute spray cleaning product following manufacturers instructions and fill trigger sprayer.
- Spray lightly onto floor – limiting area covered and not over-wetting floor
- Using machine, buff floor until dry to a high shine
- Move on to next area and repeat the spray cleaning process, flipping or changing the pad when dirty
- When whole area clean, sweep again with dust control mop
- Clean equipment and pads
- Ensure floor is cleaned first – otherwise dirt will be ground into the floor and or scratch the surface
- Do not use too aggressive a pad which may scratch the floor
- Do not use too much spray buff – floor will be left dull
- Always use a clean pad – a dirty pad will grind dirt into the floor
Recommended Products:
Snap back Spraybuff or a Diluted Floor maintainer – Buff to a shine, but do not over wet the floor